FT2232SPI Programmer: Difference between revisions
Jump to navigation
Jump to search
Hailfinger (talk | contribs) (Mention libftdi.) |
m (→Setup) |
||
| Line 18: | Line 18: | ||
== Setup == | == Setup == | ||
* Put a jumper on '''pins 8 and 9''', which configures the device to be powered by USB. Without this jumper it will not be powered, and thus not be detected by your OS (e.g. it will not | * Put a jumper on '''pins 8 and 9''', which configures the device to be powered by USB. Without this jumper it will not be powered, and thus not be detected by your OS (e.g. it will not appear in the '''lsusb''' output). | ||
* TODO: Voltage regulator 3.3V and two capacitors. | * TODO: Voltage regulator 3.3V and two capacitors. | ||
Revision as of 19:46, 4 September 2009
Recent versions of flashrom support the -p ft2232spi option which allows you to use a FTDI FT2232H/FT4232H based device as external SPI programmer.
This is made possible by using libftdi. flashrom autodetects the presence of libftdi headers and enables FT2232H/FT4232H support if they are available.
Devices
Documentation
DLP Design DLP-USB1232H
Setup
- Put a jumper on pins 8 and 9, which configures the device to be powered by USB. Without this jumper it will not be powered, and thus not be detected by your OS (e.g. it will not appear in the lsusb output).
- TODO: Voltage regulator 3.3V and two capacitors.
