NIC3Com: Difference between revisions

From flashrom
Jump to navigation Jump to search
(Created page with '3Com network cards can be used as flash programmers for parallel flash. Example board with a ZIF socket soldered on for easier flash chip change. File:3com prog.jpg')
 
(More info on 3Com cards.)
Line 1: Line 1:
3Com network cards can be used as flash programmers for parallel flash.
[[File:3com prog.jpg|320px|right|thumb|ZIF socket soldered on for easier chip swapping.]]


3Com network cards can be used as flash programmers for parallel flash devices using [[flashrom]].


Example board with a ZIF socket soldered on for easier flash chip change.
However, due to hardware limitations, most 3Com cards only support reading/writing chips up to a maximum size of '''128 KB'''!
[[File:3com prog.jpg]]

Revision as of 15:42, 2 September 2009

ZIF socket soldered on for easier chip swapping.

3Com network cards can be used as flash programmers for parallel flash devices using flashrom.

However, due to hardware limitations, most 3Com cards only support reading/writing chips up to a maximum size of 128 KB!