User:GNUtoo: Difference between revisions

From flashrom
Jump to navigation Jump to search
 
(24 intermediate revisions by the same user not shown)
Line 1: Line 1:
I've no code in flashrom yet, but I made a flashrom compatible arduino programmer and participated in testing and documentation.
I've no code in flashrom yet, but I made a flashrom compatible arduino programmer and participated in testing and documentation.
== Wiki contributions ==
My contributions to this wiki are available under the following licenses:
* [https://creativecommons.org/licenses/by-sa/3.0/legalcode CC-BY-SA 3.0]
* [https://creativecommons.org/licenses/by-sa/4.0/legalcode CC-BY-SA 4.0] or later
* [https://www.gnu.org/licenses/fdl.txt GFDL 1.3] or later
== My interests ==
* Easily available external flashers.
* BIOS->Coreboot flashing on the Libreboot compatible laptops.
* NIC flashing (to flash ipxe)
* GPU flashing (to flash sgabios)




Line 9: Line 21:
! Test result
! Test result
|-
|-
| Asus M4A785T-M mainboard
| Asrock E350M1
| W25x80 (DIP8)
|
* A25L032
|
* Works from coreboot
* Untested from the BIOS
|-
| Asus F2A85M-PRO
|
|
|-
| Asus M4A785T-M
|  
* W25x80 (DIP8)
|
* Works with the BIOS
* Works with coreboot
|-
| Lenovo Thinkpad T400
|
|
|
* Yes with the BIOS
* Yes with coreboot
|-
|-
| Asrock E350M1
| Lenovo Thinkpad T60
| A25L032
|
* MX25L1605D/MX25L1608D
|
|
* Yes from coreboot
* Works with coreboot
* Untested from the BIOS
|-
|-
| <s> Lenovo X60 </s>
| Lenovo Thinkpad X200
| <s>  MX25L1605D/MX25L1608D  </s>
|
|
|
* Yes with coreboot.
|-
|-
| Lenovo X60
| Lenovo Thinkpad X200 Tablet
|
|
|
|
* Yes with coreboot.
|-
|-
| Lenovo X60T
| Lenovo Thinkpad X60
| MX25L1605D/MX25L1608D
|
* SST25VF016B
|
|
* Yes with coreboot
* Works with coreboot.
|-
|-
| Lenovo T60
| Lenovo Thinkpad X60T
| MX25L1605D/MX25L1608D
|
* MX25L1605D/MX25L1608D  
|
|
* Yes with coreboot
* Works with coreboot
|-
|-
| PCEngines Alix.1c
| <s>PC Engines Alix.1c</s>
|
|
|
|
* Yes with coreboot
* Works with coreboot
* Yes with the recovery LPC dongle
* Works with the recovery LPC dongle
|-
|-
| Asus N71JQ
| PC Engines APU1D4
|
|
|
|
* Requires some bit flippings(with ifdtool and an external programmer) in the flash descriptor.
|-
* Not tested internally.
|}
|}


Line 57: Line 84:
{| class="wikitable"  border="1"
{| class="wikitable"  border="1"
! Device or programmer
! Device or programmer
! Flashrom driver
! Status
! Status
|-
|-
| Arduino uno (serprog)
| Arduino uno
| serprog
|
|
* Requires a 5v->3.3v level shifter for most current flash chips.
* Works fine
* Issues with the 8u2/8u3 when using the serial port at high speed.
|-
|-
| Arduino duemillanove (serprog)
| Arduino duemillanove
| serprog
|
|
* Requires a 5v->3.3v level shifter for most current flash chips.
* Works fine
* Works fine otherwise.
|-
|-
| Arduino Due ( no support for it yet )
| Arduino Due
| serprog
|
|
* 3.3v level output on SPI.
* Works fine
* Not working: No support for it yet.
|-
|-
| openmoko debug board (ft2232_spi:type=openmoko)
| openmoko debug board
| ft2232_spi:type=openmoko
|
|
* Works fine
* Works fine
|-
|-
| 3com PCI NIC (10b7:9200) (nic3com)
| 3com PCI NIC (10b7:9200)
| nic3com
|  
|  
* Works fine
* Works fine
|-
|-
| Sata SII PCI card
| Sata SII PCI card
|
|
|
* writing and erasing worked fine.
* writing and erasing worked fine.
|-
|-
| Really old PCI realtek cards
| Really old PCI realtek cards
|
|
|
* No parallel chip to test
* No parallel chip to test
|-
|-
| Some GNU/Linux embedded boards (linux_spi)
| Bug 1.x and 2.x from buglabs
| linux_spi
|
|
* Backporting some mainline kernel patches is required on some very old (2.6.35) kernel for omap3.
* Backporting some mainline kernel patches is required on some very old (2.6.35) kernel for omap3.
Line 96: Line 129:
|-
|-
| <s> An atahpt PCI card </s>
| <s> An atahpt PCI card </s>
|
|
|
*Didn't work when adding the PCI IDS, but the atahpt is known not to work according to the mailing list.
*Didn't work when adding the PCI IDS, but the atahpt is known not to work according to the mailing list.
|-
|-
| <s> old AGP Nvidia card </s>
| <s> old AGP Nvidia card </s>
|
|
|
* Worked with a patch (documented below)
* Worked with a patch (documented below)
|-
|-
| Nvidia geforce 210 PCIe 16x card
| Nvidia geforce 210 PCIe 16x card
|
|
|
* didn't work when adding the PIC IDs
* didn't work when adding the PIC IDs
Line 109: Line 145:


I've also the following hardware:
I've also the following hardware:
* [http://www.tme.eu/en/details/pom-5250/test-clips/pomona/5250/ pomona clip] for recovering my x60
* SOIC-8 and SOIC-16 clips (like the [http://www.tme.eu/en/details/pom-5250/test-clips/pomona/5250/ pomona 5250])
* some chips(2MB SO8(currently soldered), 16MB SO8)
* some chips(2MB SO8(currently soldered), 16MB SO8)


Line 119: Line 155:


* [[/Howto_flash_ipxe_on_an_3com_network_card| Howto flash ipxe on an 3com network card]]
* [[/Howto_flash_ipxe_on_an_3com_network_card| Howto flash ipxe on an 3com network card]]
* [[/Howto_flash_coreboot_on_a_pcengine_apu1 | Howto flash coreboot on an PC Engine APU1]]
* [[/Benchmarks]]

Latest revision as of 22:32, 27 April 2023

I've no code in flashrom yet, but I made a flashrom compatible arduino programmer and participated in testing and documentation.

Wiki contributions

My contributions to this wiki are available under the following licenses:

My interests

  • Easily available external flashers.
  • BIOS->Coreboot flashing on the Libreboot compatible laptops.
  • NIC flashing (to flash ipxe)
  • GPU flashing (to flash sgabios)


My hardware

Mainboard based programmers

Device or programmer Flash chip Test result
Asrock E350M1
  • A25L032
  • Works from coreboot
  • Untested from the BIOS
Asus F2A85M-PRO
Asus M4A785T-M
  • W25x80 (DIP8)
  • Works with the BIOS
  • Works with coreboot
Lenovo Thinkpad T400
Lenovo Thinkpad T60
  • MX25L1605D/MX25L1608D
  • Works with coreboot
Lenovo Thinkpad X200
Lenovo Thinkpad X200 Tablet
Lenovo Thinkpad X60
  • SST25VF016B
  • Works with coreboot.
Lenovo Thinkpad X60T
  • MX25L1605D/MX25L1608D
  • Works with coreboot
PC Engines Alix.1c
  • Works with coreboot
  • Works with the recovery LPC dongle
PC Engines APU1D4

External programmers

Device or programmer Flashrom driver Status
Arduino uno serprog
  • Works fine
Arduino duemillanove serprog
  • Works fine
Arduino Due serprog
  • Works fine
openmoko debug board ft2232_spi:type=openmoko
  • Works fine
3com PCI NIC (10b7:9200) nic3com
  • Works fine
Sata SII PCI card
  • writing and erasing worked fine.
Really old PCI realtek cards
  • No parallel chip to test
Bug 1.x and 2.x from buglabs linux_spi
  • Backporting some mainline kernel patches is required on some very old (2.6.35) kernel for omap3.
  • Works fine otherwise
An atahpt PCI card
  • Didn't work when adding the PCI IDS, but the atahpt is known not to work according to the mailing list.
old AGP Nvidia card
  • Worked with a patch (documented below)
Nvidia geforce 210 PCIe 16x card
  • didn't work when adding the PIC IDs

I've also the following hardware:

  • SOIC-8 and SOIC-16 clips (like the pomona 5250)
  • some chips(2MB SO8(currently soldered), 16MB SO8)

Work in progress for the wiki

Don't try that, it's dangerous!!!!

Howto(Dangerous, not ready for the wiki)

Retrieved from "https://wiki.flashrom.org/index.php?title=User:GNUtoo&oldid=2582"