MSI JSPI1

From flashrom
Revision as of 21:57, 22 October 2014 by Stefanct (talk | contribs) (Created page with "JSPI1 is a 5×2 2.0mm pitch pin header on many MSI motherboards. It is used to recover from bad boot ROM images. Specifically, it appears to be used to connect an alternate R...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This wiki is retired

Our website is https://www.flashrom.org, instructions on how to add or update documentation are here

All wiki content available in read-only mode at wiki.flashrom.org

JSPI1 is a 5×2 2.0mm pitch pin header on many MSI motherboards. It is used to recover from bad boot ROM images. Specifically, it appears to be used to connect an alternate ROM with a working image. Pull the #HOLD line low to deselect the onboard SPI ROM, allowing another SPI ROM to take its place on the bus.

JSPI1
name pin pin name
3VSB 1 2 3VSB
MISO 3 4 MOSI
#SS 5 6 SCLK
GND 7 8 GND
#HOLD 9 10 NC
name function
3VSB standby 3.3V
MISO SPI Master In/Slave Out
MOSI SPI Master Out/Slave In
#SS SPI Slave (Chip) Select (active low)
SCLK SPI Clock
GND ground/common
#HOLD SPI hold (active low)
NC Not Connected (no pin)