Paraflasher
This wiki is retired
Our website is https://www.flashrom.org, instructions on how to add or update documentation are here
All wiki content available in read-only mode at wiki.flashrom.org
THIS PAGE IS STILL UNDER CONSTRUCTION AND IS NOT LINKED ANYWHERE YET
Welcome to The LPCflasher Project. Open source hardware for open source software. The project is maintained by Joseph Smith.
INSERT PICTURE
Overview
The LPCflasher is low-cost simple flash programmimng device. It can be used to flash a variety of LPC flash chips and firmware hubs (FWH). The hope is someday it will also be able to support SPI chips. Anyone with novice to moderate soldering skills can build one. It is also meant to be modular so you can flash a variety flash chip packages. The LPCflasher is based on an old LPC programmer built to flash LPC chips on the xbox, the LPC^2 (Low Parts Count LPC Programming Cable). The LPCflasher is not for sale, it is meant for that "do-it-yourself" kind of person. Although if the project becomes popular, bare PCB's could be produced and sold at cost.
Components
TODO
The Circuit Explained
TODO
Daughter Cards
TODO
Software
TODO: flashrom???
Support
TODO
Conclusion
TODO