Laptop enable
This wiki is retired
Our website is https://www.flashrom.org, instructions on how to add or update documentation are here
All wiki content available in read-only mode at wiki.flashrom.org
Intro
- http://flashrom.org/Board_Enable
- http://flashrom.org/Laptops
- http://www.coreboot.org/Embedded_controller
- http://www.coreboot.org/Laptop#Embedded_controllers
Most (all?) laptop designs use an EC (embedded controller) to control the backlight, watch the battery status, etcetera.
To access the flash chip (safely), the EC needs to be suspended/stopped. The code to stop the EC typically is found at the end of a BIOS binary. This page is about that trailing part of a binary.
Using a laptop BIOS (Phoenix TrustedCore) file that is one megabyte large, the TRAILER starts at 0x100001 (1024^2 + 1).
Example of a disassembly
The disassembler that is used is IDAPro, the freeware version.
Example of how the disassembly of the trailer looks:
TRAILER:0010 09 00 00 00 00 00 00 00 00 00 00 43 6F 6D 70 61 ..........Compa
TRAILER:0020 6C 20 57 69 6E 50 68 6C 61 73 68 20 2D 20 46 6C l WinPhlash - Fl
TRAILER:0030 61 73 68 69 6E 74 2E 61 73 6D 20 76 30 2E 30 33 ashint.asm v0.03
TRAILER:0040 5A 46 4C 50 46 25 00 00 00 00 00 00 00 59 02 00 ZFLPF%
Hints, facts and calculations
Facts:
- ZFLPF is found at 0x40
- len(ZFLPH) = 5
The location of the entrypoint is stored at 0x51:
0x51 =
position of ZFLPF + len(ZFLPF) + (((position where the string "Compal" starts) >> 1) - 1) =
0x40 + 5 + ((0x1b >> 1) - 1) =
0x40 + 5 + 0xc
Note that the above two formulas can be wrong.
Let's take a look at position 0x51:
TRAILER:0051 DE 02 dw 2DEh
Fact:
- 0x2de + 0x1b = 0x2f9
Preview of the begin of the board specific code
TRAILER:02F9 ; ---------------------------------------------------------------------------
TRAILER:02F9 9C pushf
TRAILER:02FA 60 pusha
TRAILER:02FB E8 C2 00 call determine_lpc_pci_id