Downloads: Difference between revisions

Revision as of 16:27, 21 January 2010

You can browse the flashrom source code online, or download and install flashrom as explained below.

Requirements:

pciutils development package (pciutils-dev/libpci-dev/pciutils-devel, depending on OS/distribution)
zlib development package (zlib1g-dev/zlib-devel, depending on OS/distribution)
libftdi development package (libftdi-dev), optional support for the external FT2232SPI flasher.
subversion (if you checkout the source and build manually)

Manual installation from source:

If you just want to use the latest release, download flashrom 0.9.1 (source) here (sig).

If you want the latest source code (for developers), check out our code from subversion:

$ svn co svn://coreboot.org/flashrom/trunk flashrom
$ cd flashrom
$ make
$ sudo make install

Binary packages:

Debian: sudo aptitude install flashrom
Ubuntu: sudo aptitude install flashrom
Fedora: sudo yum install flashrom
Gentoo: emerge flashrom
Mandriva: urpmi flashrom
openSUSE: yast -i coreboot-utils
- For distributions older than openSUSE Factory (11.0) you find "backports" in the openSUSE Build Service.
T2 SDE
- Installation from source: Emerge-Pkg flashrom
- Installation of binaries: mine -i flashrom-0.9.0.tar.bz2
FreeBSD: cd /usr/ports/sysutils/flashrom && make install clean
- The version from trunk (latest revision while writing this is r877) is usable too but you NEED devel/libpci and devel/gmake from ports.

Furthermore, edit Makefile and change line 254 (diff style):

- @$(CC) $(CFLAGS) $(LDFLAGS) .test1.c -o .test1 -lpci $(LIBS) >/dev/null 2>&1 && \'

into this:

+ @$(CC) -c $(CFLAGS) $(LDFLAGS) .test1.c -o .test1 -lpci $(LIBS) >/dev/null 2>&1 && \'

Windows: There is a Windows port of the flashrom utility. Download the latest version: DarmawanMappatutu_Salihun.tar.gz.

Releases:

Windows port: In 2009, several patches for Windows, based on a more recent revision of flashrom, were made available:

@@ Line 33: / Line 33: @@
 * '''FreeBSD''': cd /usr/ports/sysutils/flashrom && make install clean
 ** The version from trunk (latest revision while writing this is r877) is usable too but you '''NEED devel/libpci''' and devel/gmake from ports.
-**
 : Furthermore, edit Makefile and change line 254 (diff style):
-	-       @$(CC) $(CFLAGS) $(LDFLAGS) .test1.c -o .test1 -lpci $(LIBS) >/dev/null 2>&1 && \'
+:	-       @$(CC) $(CFLAGS) $(LDFLAGS) .test1.c -o .test1 -lpci $(LIBS) >/dev/null 2>&1 && \'
 : into this:
 : +       @$(CC) -c $(CFLAGS) $(LDFLAGS) .test1.c -o .test1 -lpci $(LIBS) >/dev/null 2>&1 && \'