Paraflasher

THIS PAGE IS STILL UNDER CONSTRUCTION AND IS NOT LINKED ANYWHERE YET

Welcome to The LPCflasher Project. Open source hardware for developing open source software. The project is maintained by Joseph Smith.

INSERT PICTURE

Overview

The LPCflasher is low-cost simple flash programming device. It can be used to flash a variety of LPC flash chips and firmware hubs (FWH). The hope is someday it will also be able to support SPI chips. It is also meant to be modular so you can flash a variety flash chip packages. The LPCflasher is based on an old LPC programmer built to flash LPC chips on the xbox, the LPC^2 (Low Parts Count LPC Programming Cable). The LPCflasher is not for sale, it is meant for that "do-it-yourself" kind of person. Although if the project becomes popular, bare PCB's could be produced and sold at cost. Anyone with novice to moderate soldering skills can build one.

Components

DB25 Connector	Type:D Sub	No. of Contacts:25	Gender:Plug	Contact Termination:Right Angle Through Hole	Used ITW McMurdo DB25PNF
7 Resistors	Resistance:1kohm	Power Rating:250mW (1/4W)	Material:Metal Film		Used IRC / TT Electronics CMF1/41001FLFTR
Octal Buffer	Package/Case:20-DIP	IC Generic Number:74HC244	Supply Voltage Max:6V	Mounting Type:Through Hole	Used STMicroelectronics M74HC244B1R
Header Connector	Gender:Header	No. of Contacts:16	Pitch Spacing:2.54mm	No. of Rows:2	Used Molex 10897162

USB B Connector

Gender:Receptacle

No. of Contacts:4

Contact Termination:Right Angle Through Hole

Connector Mounting:PC Board

Used Adam Technologies USB-B-S-RA

PTC Resettable Fuse

Hold Current: 0.25 Amp (250ma)

Trip Current: 0.5 Amp (500ma)

Current Rating (Max): 40 Amps

Used Littlefuse 60R025XU

Blue LED

Bulb Size:5mm

LED Color:Blue

Forward Current:20mA

Forward Voltage:3.4V

Used OPTEK Technology OVLFB3C7

LED Resistor

Resistance:200 Ohms

Power Rating:2 Watts

Material:Metal Film

Used Vishay/Dale CPF2200R00FKE14

Linear Voltage Regulator

Voltage Regulator Type:LDO Linear

Output Voltage Max:3.3V

Package/Case:3-TO-220

No. of Pins:3

Used National Semiconductor LM1084IT-3.3/NOPB

2 Tantalum Capacitors

Capacitance: 10 uF

Tolerance: 10%

Voltage Rating: 10 Volts

Termination Style: Axial

Product: Tantalum Solid High Reliability

Used Vishay/Sprague 173D106X9010VE3

Breadboard PCB

External Height: TODO

External Width: TODO

Board Thickness:1.5mm

Pitch Spacing:2.54mm

Hole Diameter:1mm

Used a piece of Roth Electronik 26M2198

Hook-Up Wire

Conductor Size AWG:30

Jacket Material:Polyvinylchloride (PVC)

No. Strands x Strand Size:Solid

Conductor Material:Copper

Used Belden 9978 013100

The Circuit Explained

TODO

Daughter Boards

TODO

Software

TODO: flashrom???

Support

TODO

Conclusion

TODO