Per region file arguments

Current chromium impl.

Current chromium flashrom implements the syntax like this:

   [-i <region>[:<file>]]... -r|-w|-v [<filename>]

Where <filename> can be given anywhere on the command line (non-positional).

Rules:

• Argument to -r/-w/-v is optional.
  • If used, it tells flashrom to operate on a ROM-sized file.
  • If not, flashrom will only operate on region-sized files.
• If no argument to -r/-w/-v is specified, then files must be specified via -i arguments.
• -r/-w/-v and -i options are non-positional, allowing commands to be easily constructed dynamically by higher-level logic.

• For reading:
  • If -i region:<file> is used, read content from region into <file>.
  • If any -i region:<file> is specified along with -r <filename>, read all included regions into <filename> and all included regions with a <file> specified into the respective file

• For writing and verifying:
  • If -i region:<file> is used, write content from <file> to region or verify content from <file> against region.
  • If any -i region:<file> is specified along with -w <filename>, the data of -i region:<file> will overwrite data in <filename>. This is useful for patching specific regions of a generic image, for example if you have a release image for a platform and wish to patch it with machine-specific data (such as MAC address) at manufacturing time.
  • Regions with files specified via -i region:<file> must not overlap

More examples: https://www.chromium.org/chromium-os/packages/cros-flashrom#TOC-Partial-Reads-and-Writes

More explicit alternative

   [-i <region>]... (-r|-w|-v [<region>:]<filename>)...

Easier to implement, no optional arguments, no non-positional arguments.

Rules for sanity:

• combinations of -r/-w/-v are not allowed
• -r/-w/-v <filename> (i.e. without a <region>) may only be specified once
• if no -r/-w/-v <filename> (i.e. without a <region>) is specified, no -i arguments may be given either

optionally, stricter

Never mix <region>:<file> with the old -i syntax in one invocation:

   ([-i <region>]... (-r|-w|-v <filename>) | (-r|-w|-v <region>:<filename>)...)

Files not matching the region's size

Both syntaxes can be extended for files that are smaller than the region:

   <region>[<filename>

would denote that the file's contents should be placed at the start/bottom of the region,

   <region>]<filename>

that the file's contents should be placed at the end/top of the region. By default the uncovered part of the region should be kept as is, unless

   --pad

is specified, in which case the uncovered part would be padded with the flash chip's erased state (usually 0xff).

Additonal rules

• Beside `:`, `[` and `]` wouldn't be allowed in region names.