|
|
| (59 intermediate revisions by 7 users not shown) |
| Line 1: |
Line 1: |
| Recent versions of [[flashrom]] support the '''-p ft2232spi''' option which allows you to use a '''FTDI FT2232H/FT4232H''' based device as external SPI programmer.
| | {{#externalredirect: https://www.flashrom.org/supported_hw/supported_prog/ft2232_spi.html }} |
| | |
| == Devices ==
| |
| | |
| * [http://www.dlpdesign.com/usb/usb1232h.shtml DLP Design DLP-USB1232H]
| |
| * [http://www.ftdichip.com/Products/EvaluationKits/FT2232H_MiniModule.htm FT2232H Mini-Module Evaluation Kit]
| |
| * [http://www.ftdichip.com/Products/EvaluationKits/FT4232H_MiniModule.htm Ft4232H Mini-Module Evaluation Kit]
| |
| | |
| == Documentation ==
| |
| | |
| * [http://www.dlpdesign.com/usb1232h-ds-v10.pdf DLP-USB1232H datasheet]
| |
| * [http://www.dlpdesign.com/usb/ds_ft2232h.pdf FTDI FT2232H datasheet]
| |
| | |
| == Setup ==
| |
| | |
| * Put a jumper on '''pins 8 and 9''', which configures the device to be powered by USB. Without this jumper it will not be powered, and thus not be detected by your OS (e.g. it will not appeat in the '''lsusb''' output).
| |
| * TODO: Voltage regulator 3.3V and two capacitors.
| |
| | |
| == Photos ==
| |
| | |
| <gallery>
| |
| File:Dlp usb1232h top.jpg
| |
| File:Dlp usb1232h side.jpg
| |
| File:Dlp usb1232h bottom.jpg
| |
| File:Via epia m700 bios.jpg
| |
| File:Via epia m700 programer.jpg
| |
| File:Ft2232spi programer.jpg
| |
| </gallery>
| |
| | |
| == Where to buy ==
| |
| | |
| * [http://digikey.com/scripts/dksus.dll?Detail&name=813-1026-ND Digikey]
| |
| * [http://de.mouser.com/Search/ProductDetail.aspx?qs=sGAEpiMZZMt/5FJRvmqHBjWi/VTYGDW6 Mouser]
| |
| * [http://www.saelig.com/product/UB068.htm Saelig]
| |